diff --git a/arch/arm/mach-snapdragon/clock-apq8096.c b/arch/arm/mach-snapdragon/clock-apq8096.c
new file mode 100644
index 0000000..3d363d4
--- /dev/null
+++ b/arch/arm/mach-snapdragon/clock-apq8096.c
@@ -0,0 +1,62 @@
+/*
+ * Clock drivers for Qualcomm APQ8096
+ *
+ * (C) Copyright 2017 Jorge Ramirez Ortiz <jorge.ramirez-ortiz@linaro.org>
+ *
+ * Based on Little Kernel driver, simplified
+ *
+ * SPDX-License-Identifier:	BSD-3-Clause
+ */
+
+#include <common.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <linux/bitops.h>
+#include "clock-snapdragon.h"
+
+/* GPLL0 clock control registers */
+#define GPLL0_STATUS_ACTIVE		BIT(30)
+#define APCS_GPLL_ENA_VOTE_GPLL0	BIT(0)
+
+static const struct bcr_regs sdc_regs = {
+	.cfg_rcgr = SDCC2_CFG_RCGR,
+	.cmd_rcgr = SDCC2_CMD_RCGR,
+	.M = SDCC2_M,
+	.N = SDCC2_N,
+	.D = SDCC2_D,
+};
+
+static const struct gpll0_ctrl gpll0_ctrl = {
+	.status = GPLL0_STATUS,
+	.status_bit = GPLL0_STATUS_ACTIVE,
+	.ena_vote = APCS_GPLL_ENA_VOTE,
+	.vote_bit = APCS_GPLL_ENA_VOTE_GPLL0,
+};
+
+static int clk_init_sdc(struct msm_clk_priv *priv, uint rate)
+{
+	int div = 3;
+
+	clk_enable_cbc(priv->base + SDCC2_AHB_CBCR);
+	clk_rcg_set_rate_mnd(priv->base, &sdc_regs, div, 0, 0,
+			     CFG_CLK_SRC_GPLL0);
+	clk_enable_gpll0(priv->base, &gpll0_ctrl);
+	clk_enable_cbc(priv->base + SDCC2_APPS_CBCR);
+
+	return rate;
+}
+
+ulong msm_set_rate(struct clk *clk, ulong rate)
+{
+	struct msm_clk_priv *priv = dev_get_priv(clk->dev);
+
+	switch (clk->id) {
+	case 0: /* SDC1 */
+		return clk_init_sdc(priv, rate);
+		break;
+	default:
+		return 0;
+	}
+}